Bent Leg Dividers
Can be made without upon request.
Bent leg dividers. The rounded body fits comfortably in the users hand. Then the inside calipers points are measured to a vernier calipers to get an actual size. Spring Calliper Square Leg Square Leg Spring Divider German Type Quick Release Callipers Item Code No.
Scribers Dividers and Pin Vises. One-half of the leg 34 should protrude above the vise jaws. To form the major bend clamp the leg edgeways in a stout vise with the wider end between the jaws.
A brass arc or wing with a circumference of approximately 8-12 joins the legs. Crain 380 Deluxe Dividers have a forged steel bent leg with sharpened point and an adaptable straight leg for marking with either a scriber needle or with ink. 16-X Pin Vise shown below.
These brass and steel dividers are joined by a ball-shaped hinge. These cast steel dividers are sturdily constructed and specifically modified to meet the needs of the floor covering installer. Barwalt Tile Spacers and Wedges.
This is used for marking parallel liners from a finished edge and also for locating the center of round bars. Description 1380-F Pin Vise Tip 1380-I Eye Bolt. These dividers have a forged steel bent leg with sharpened point and an adaptable straight leg for marking with either a scriber needle or with ink.
Includes a bent leg and a removable straight leg that can span up to six inches. A hermaphrodite caliper has one leg bent inward and one straight leg ending in a sharp point. It is specified by the length of the leg up to the hinge point.
